Lavender & Herb Harvester (HT-Tom)

• New model now available, as shown in top centre picture (HT–Tom – full view).
• Single person operation.
• Quick assembly time of approx. 2 minutes, slightly longer if sling removed.
• Cuts and collects the crop in a single pass with negligible plant disturbance or ground compaction.
• Adjustable fingers pick up the crop from the sides of the row and feed it over the cutter bar, ensuring all the crop is cut.
• Adjustable cutter bar height, allowing plants / cuttings to be trimmed to the optimum height/length.
• Circular cutter bar follows contours of shrubs, providing provides better cutting of sides and results in a finished shape pleasing to the eye.
• Adjustable frame height to suit operator, with engine controls on side frame, the operator can walk directly behind the harvester or walk offset in a wheel track.
• Frame is fully zinc plated for low maintenance.
• Quick dismantling of harvester and compact storage – no spanners required! Main wheels have quick release lynch pins allow quick removal and folding of frame for compact storage or easy transporting in a vehicle.
• Heavy duty sling protects collection bag.
• Quick release frame for the collection bag allows easy bag removal. Bag sits on a sling and is attached to the quick release frame with a bungy cord.
• Extra harvesting bags available for different crops.

• Cutting height (at outside edge): adjustable from 100 to 870mm Note: Due to blade curve (1150mm radius) the cutting height is 135mm higher in the centre of the harvester.
• Cutting width: 1210mm
• Wheel track: 1610mm front / 1435mm rear
• Wheel drive: none
• Belt speed: n/a
• Weight, dry: 46Kg
• Collecting bin / bag: supplied bag
• Engine: Husqvarna Zenoah G4K-D (used to be Komatsu Zenoah) 41.5cc air cooled 2 stroke gasoline engine
• Dimensions:
  

  Width(mm)	Length(mm)	Height(mm)	cu.m(approx.)	Kg(approx.)
  Ready to use	1700	-*	–	–	–
  For freighting (on pallet)	–	–	–	1.70	120

  * including fingers.

Handbook_HT-Tom

Handbook_HT-Tom-Special